This page provides a guide to configuring a IBM TSM storage as a Storage Target in the Verba Recording System.
TSM is an alternative to the traditional optical "write once, read many" (WORM) data. The file retention policy can be managed on TSM side via Management Classes. TSM does not support direct CIFS/SMB access to the stored files which limits , limiting some Verba functionality and so is recommended functionalities, therefore we recommend to use it as a long term archive storage. The following features are not supported features:
- Speech analytics
- Screen capture multiplexing
- In-place transcoding storage policies
Via dsmadmc you should create a new node for each Verba servers accessing server that accesses the TSM server.
Use the following command: register node [nodename] [password]
With this configuration Verba will connect to server 192the 192.168.1.149:1500 via server via TCP as node using the "SAMPLE" using node with the "password" password " (see client node provisioning section).
Creating a TSM target
Follow the steps below to create a new Verba Storage target for TSM:
Step 2 - Click on Add New Storage Target
Step 3 - Fill out in the configuration form according to the requirements in the following table.
Step 4 - Click Save to save the settings